Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Keeping a drink within reach sounds simple until vibration, bumps, and crowded controls make a handlebar mount difficult to trust. The KEMIMOTO ATV Cup Holder uses an adjustable metal clamp, thick polypropylene holder arms, and anti-slip pads to hold 12 oz to 28 oz drink containers. This review helps you check bar fit, cup size, mounting clearance, and everyday usefulness before you order. Its broad compatibility is helpful, but the 1.56-inch maximum clamp size and open holder design remain important limits.
Quick Verdict
Rating: 8/10
Best For: Riders and utility users who need a clamp-on drink holder for a round bar measuring 0.6 inches to 1.56 inches.
Bottom Line: The KEMIMOTO ATV Cup Holder offers a useful 12 oz to 28 oz cup range, a 3.5-inch maximum cup diameter, and a metal clamp with anti-slip pads. It is less suitable for oversized bars, crowded controls, or riding that calls for a fully enclosed bottle cage.
| Specification | Detail |
|---|---|
| Brand | KEMIMOTO |
| Model number | KM1B0113-06701BK-M |
| Product type | Adjustable handlebar cup and bottle holder |
| Color | Black |
| Mounting style | Clamp-on mount with two anti-slip pad gaskets |
| Mount adjustment | Mount can rotate 90 degrees for positioning |
| Handlebar fit | 0.6 inches to 1.56 inches |
| Supported cup size | 12 oz to 28 oz |
| Maximum cup diameter | 3.5 inches |
| Dimensions | 7.48L x 6.3W x 3.15H inches |
| Materials | Metal clamp and thick polypropylene holder |
| Grip design | Crocodile bite clamp profile with two anti-slip pads |
| Package quantity | One cup holder |
| ASIN | B08R6VT4FQ |
| Compatible uses | ATVs, motorcycles, bicycles, e-bikes, scooters, boats, strollers, wheelchairs, walkers, golf push carts, and similar round bars within the fit range |
| Safety note | Check bar diameter, control clearance, cup fit, and clamp tightness before each ride. |
Key Takeaways
- The clamp fits round bars from 0.6 inches to 1.56 inches, so measuring the exact mounting point is your first step.
- The holder is designed for 12 oz to 28 oz containers with a maximum diameter of 3.5 inches.
- A metal clamp, thick polypropylene holder, and two anti-slip pads provide the main structure and grip.
- The package includes one holder, so a two-vehicle or two-passenger setup requires a second unit.
- It is a practical open holder for compatible bars, but it is not a fully enclosed cage for severe bumps or oversized bottles.
What Is the KEMIMOTO ATV Cup Holder?
The KEMIMOTO ATV Cup Holder, model KM1B0113-06701BK-M, is a clamp-on holder for handlebars and other round mounting bars. It is sold as a single black holder and is designed for 12 oz to 28 oz cups, bottles, cans, and travel mugs.
The adjustable clamp fits bars from 0.6 inches to 1.56 inches. This range covers many ATVs, motorcycles, bicycles, e-bikes, scooters, boats, strollers, wheelchairs, walkers, golf push carts, and utility setups, but the shape and available space around the bar still matter.
The holder measures 7.48L x 6.3W x 3.15H inches and combines a metal clamp with thick polypropylene. Its main selling point is the open, adjustable holder design, which accepts more container shapes than a narrow bottle cage while keeping installation simple.
Who Should Buy It?
Best For
- ATV riders who want a steady drink holder for trail rides and outdoor use.
- Motorcycle or electric bike users with handlebars between 0.6 inches and 1.56 inches.
- Buyers who prefer a stronger clamp-style holder over a simple clip-on cup holder.
Skip If
- Your handlebar or mounting point is wider than 1.56 inches.
- You need a holder that fully encloses a bottle for aggressive riding.
- Your mounting area is tapered, irregular, or crowded by controls, cables, mirrors, or displays.
Before You Buy: Measure your handlebar before ordering. This cup holder is listed for bars from 0.6 inches to 1.56 inches and is not the right choice for wider mounting points.
Key Features of KEMIMOTO ATV Cup Holder
Fit and Compatibility
The adjustable clamp supports round bars from 0.6 inches to 1.56 inches. That range gives you more mounting options than a fixed-diameter clamp and allows the holder to work across many recreational, mobility, and utility setups.
The stated range does not guarantee a safe fit on every vehicle. A tapered bar, oval section, textured control area, or crowded handlebar can prevent full clamp contact. Measure the exact point where the clamp will sit, not a nearby section that may have a different diameter.
Materials and Build Quality
The mounting clamp is metal, while the adjustable cup section uses thick polypropylene. This combination puts the rigid material at the bar connection and keeps the drink-holding arms flexible enough to accept different container shapes.
The listing describes the polypropylene as thicker and crack-resistant compared with the brand’s older design. That does not make the holder indestructible, so inspect the arms, screws, pads, and clamp after impacts or repeated rough use.
Drink Size and Capacity
The stated container range is 12 oz to 28 oz, with a maximum adapted diameter of 3.5 inches. The adjustable bottom and flexible holder arms can accept common cans, bottles, water cups, and travel mugs within those limits.
Volume alone does not confirm fit. A 28 oz container with a very wide base, large side handle, narrow lower section, or top-heavy shape may sit poorly even when its labeled capacity is within range. Measure the widest part that will contact the holder.
Grip and Stability
The crocodile bite grip design is meant to reduce slippage and vibration. Two anti-slip pad gaskets add more contact between the clamp and the bar, which can improve stability when the ride gets bumpy.
This design does not make the holder spill-proof. A lid still matters if you ride rough trails, take sharp turns, or carry hot drinks. The holder can secure the cup, but the cup itself must also be suitable for motion.
How to Install the KEMIMOTO Cup Holder
Start by measuring the exact mounting point and confirm that it falls between 0.6 inches and 1.56 inches. Choose a straight, round section that gives the clamp full contact and leaves enough room for the holder and your drink.
Place the two anti-slip pads between the metal clamp and the bar. Position the holder so it cannot block a brake lever, throttle, clutch, switch, mirror mount, light, display, steering movement, or cable path.
Use the mount’s 90-degree adjustment to position the cup area as upright as your setup allows. Tighten the clamp evenly until the holder cannot rotate by hand, but do not overtighten it against a delicate or thin-walled bar. Insert an empty container, turn the handlebars fully in both directions, and confirm clearance before testing with a filled, lidded drink.
Pro Tip: Install the holder on a straight section of the bar when possible. A straight mounting point gives the clamp more even contact and helps the cup sit more upright.
Compatibility and Safety
This cup holder touches your vehicle controls only through its clamp area, so placement matters. Keep it away from moving parts and do not mount it where it could interfere with steering, braking, throttle use, or visibility.
For electric bikes and motorcycles, check cable routing before tightening the clamp. A cup holder should not press against brake lines, display wires, or control cables. If your setup feels crowded, choose another mounting point or skip the holder.
Use a lidded cup when riding over uneven surfaces. The KEMIMOTO holder can help reduce cup movement, but an open drink can still splash during off-road use, sudden stops, or sharp turns.
Where the Design Works, and Where Fit Can Fail
The strongest part of this design is the connection between the metal clamp, anti-slip pads, and adjustable holder arms. When the bar is round, clean, and within the stated range, those parts give the holder a stable base for common drink containers.
The weak point is setup-specific fit. A clamp can meet the diameter requirement and still sit poorly on a tapered section, near a weld, or beside crowded controls. The open arms also provide less retention than a closed cage when the vehicle leans sharply or hits severe bumps.
Pros and Cons
Pros
- Fits a useful handlebar range from 0.6 inches to 1.56 inches.
- Supports 12 oz to 28 oz containers and cup diameters up to 3.5 inches.
- Metal clamp and thick polypropylene holder provide a more structured mount than an all-plastic clip.
- Crocodile bite grip and anti-slip gaskets help reduce vibration and slippage.
- Fits many recreational, mobility, and utility bars when diameter and clearance are correct.
Cons
- Will not fit handlebars wider than 1.56 inches.
- May require trial and error to find the best mounting angle.
- Not a fully enclosed holder, so open drinks can still splash on rough rides.
How It Performs in Real Use
For ATV Trail Rides
On an ATV, the holder gives you a dedicated place for water during slow trail riding, yard work, or relaxed outdoor trips. For rougher terrain, use a bottle or lidded cup because bumps can still move liquid inside the container.
For Motorcycle Cruising
On a motorcycle, the handlebar fit range is helpful, but placement is more sensitive. You need clear access to the throttle, brake, clutch, switches, and mirrors. If the holder crowds your controls, it is not worth the convenience.
For Electric Bikes
The holder can work on an electric bike if the bar diameter fits and the clamp does not press on cables or display wiring. It is most useful for casual rides where you want quick access to a drink without using a backpack.
For Daily Outdoor Use
For regular outdoor use, the simple clamp-on design is the main benefit. You can keep a drink close while riding, working around a property, or taking short recreational trips. Cleaning the holder after dusty rides will help keep the cup area and clamp pads in better shape.
Setup Tips Before First Use
- Measure first: Confirm your bar is between 0.6 inches and 1.56 inches before you depend on the fit.
- Check clearance: Turn the handlebars fully left and right after installation to make sure the holder does not hit the tank, dash, cables, or controls.
- Use the pads: Install the anti-slip pad gaskets because they help the clamp grip the bar more securely.
- Start with a lidded drink: Test the holder with a closed bottle or travel cup before using an open cup on a ride.
- Retighten after the first ride: Vibration can settle the clamp, so check tightness again after initial use.
How It Compares to Alternatives
Compared with basic plastic clip-on cup holders, the KEMIMOTO stands out for its metal and thick polypropylene build, adjustable handlebar fit, and anti-slip gasket setup. It makes the most sense if you want stronger clamping and better stability than a light-duty holder.
Compared with soft bicycle bottle cages or fully enclosed UTV cup holder setups, this design is more open and more flexible for different drink shapes. The tradeoff is that it does not wrap around the full bottle, so aggressive riders may prefer a closed or vehicle-specific holder.
Is It Worth the Price?
The KEMIMOTO ATV Cup Holder offers strong value for the price when you need one adjustable holder for a compatible round bar. Its value comes from the 0.6-inch to 1.56-inch clamp range, 12 oz to 28 oz container support, metal mounting clamp, and included anti-slip pads.
You get the most value when your mounting point is easy to measure and you use a lidded container with a stable base. The single-holder package also suits buyers who need only one drink position rather than a paired setup.
It is not the best fit for oversized bars, highly tapered mounting points, crowded controls, or aggressive use that demands full bottle enclosure. A vehicle-specific mount or closed cage may be the better choice in those cases.
Frequently Asked Questions
What handlebar size does the KEMIMOTO ATV Cup Holder fit?
It fits handlebars from 0.6 inches to 1.56 inches. Measure your bar before buying because it is not designed for wider handlebars.
What cup and bottle sizes does it hold?
The stated range is 12 oz to 28 oz, with a maximum cup diameter of 3.5 inches. Check the container’s base shape and handle clearance because labeled volume alone does not guarantee a secure fit.
Can the cup holder be used on electric bikes?
Yes, it can work on an electric bike if the handlebar falls within the 0.6-inch to 1.56-inch range. Make sure the clamp does not interfere with brake cables, display wiring, lights, or controls.
Is the KEMIMOTO Cup Holder waterproof?
No waterproof rating is stated in the available product information. The metal and polypropylene construction suggest it is suitable for outdoor use, but you should dry and clean it after wet or muddy rides.
Will it stop drinks from spilling on rough trails?
It can help reduce cup movement, but it does not make an open drink spill-proof. Use a lidded bottle or travel cup when riding over rough ground.
How should you clean and inspect it?
Wipe away mud, grit, and drink residue with a damp cloth, then dry the clamp and hardware. Check the screws, pads, holder arms, and mounting position before your next ride.
How many cup holders come in the package?
The linked listing is for one cup holder. You need to order another unit if you want holders for two vehicles or two seating positions.
Who should skip this cup holder?
Skip it if your handlebar is wider than 1.56 inches or if you need a fully enclosed holder for aggressive riding. You may also want a different design if your handlebar area is crowded with controls, mirrors, lights, or display mounts.
The Bottom Line
The KEMIMOTO ATV Cup Holder is recommended with caveats if you need an adjustable holder for a 0.6-inch to 1.56-inch round bar and a 12 oz to 28 oz drink container. Its main strengths are the metal clamp, flexible holder arms, and two anti-slip pads.
Skip it if your bar is oversized or tapered, your controls leave no safe mounting space, or you need a fully enclosed cage for severe bumps. For compatible ATVs, motorcycles, bicycles, e-bikes, and utility setups, it is a practical add-on when you measure and install it carefully.
