Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
A loose bottle or poorly fitted drink holder can become a distraction when you ride over rough pavement. The KEMIMOTO Motorcycle Cup Holder uses a fabric holder, a two-screw adjustable clamp, and a tightening drawstring to keep many common bottles within reach. Its 24-ounce capacity and 0.6- to 1.5-inch clamp range make it flexible, but it does not fit every motorcycle or every oversized tumbler. This review helps you decide whether its fit, capacity, and installation style match your setup.
Quick Verdict
Rating: 8/10, recommended with fit-related caveats
Best For: Riders who want a washable fabric holder for a bottle or cup up to 24 ounces on a compatible round bar.
Bottom Line: The two-screw clamp, drawstring, drain opening, and side pockets make this a practical add-on for daily rides. Measure your mounting bar and bottle first because the medium holder has a 3.94-inch bottom diameter and the listing excludes several motorcycle models.
| Specification | Detail |
|---|---|
| Brand | KEMIMOTO |
| Product type | Clamp-on motorcycle and powersports cup holder |
| ASIN | B083TV995S |
| Amazon model number | KMBZH0208-02-VC |
| Manufacturer part number | MU-BZH0191-02 |
| Holder dimensions | 5.12 x 4.33 x 4.33 inches |
| Material | 600D Oxford fabric |
| Maximum cup capacity | Up to 24 ounces |
| Bottom diameter | 3.94 inches |
| Clamp range | 0.6 to 1.5 inches |
| Clamp design | 90° adjustable alligator clamp with two screws and a cross-mounting hole |
| Drink retention | Adjustable top drawstring |
| Storage | Two separate mesh pockets |
| Drainage | Drain opening at the bottom |
| Listed exclusions | Road King, Spyder RT, and Burgman 400s |
| Package note | The reviewed listing shows 1-piece medium, 1-piece large, and 2-piece medium selections. Confirm the chosen variant before ordering. |
Key Takeaways
- The medium KEMIMOTO holder supports cups and bottles up to 24 ounces and has a listed 3.94-inch bottom diameter.
- The two-screw alligator clamp fits round bars from 0.6 to 1.5 inches in diameter.
- 600D Oxford fabric, a bottom drain, and two mesh pockets make it easier to clean and more useful than a basic open ring.
- The top drawstring helps control bottle movement, but you still need a correctly sized, lidded drink container.
- The listing says it is not compatible with Road King, Spyder RT, or Burgman 400s models.
Why KEMIMOTO Stands Out Among Motorcycle Cup Holders
The KEMIMOTO design combines a soft-sided holder with a metal clamp instead of using a rigid cup ring alone. The 600D Oxford fabric can flex around different drink shapes, while the reinforced drawstring lets you tighten the opening around the upper part of a bottle or cup.
The clamp is the main reason to consider this model. It adjusts through 90 degrees, uses two screws, and includes a cross-mounting hole to reduce spinning. That setup gives you more positioning choices on a motorcycle, ATV, scooter, boat rail, bike, walker, or another compatible round bar.
What Is the KEMIMOTO Motorcycle Cup Holder?
This is a clamp-on drink holder made for riders and outdoor users who do not have a built-in cup holder. The reviewed Amazon listing is the KEMIMOTO medium fabric version associated with ASIN B083TV995S. It mounts to a 0.6- to 1.5-inch bar and holds a cup or bottle up to 24 ounces.
Unlike a rigid automotive cup holder, the fabric body surrounds more of the container. A drawstring closes around the top, two mesh pockets hold small items, and a drain at the bottom helps release collected water. It is an add-on convenience accessory, not a substitute for safe riding habits or secure vehicle storage.
Who Should Buy It?
Best For
- Motorcycle, ATV, scooter, bike, boat, or mobility-aid users with a round 0.6- to 1.5-inch mounting bar.
- People who carry bottles or cups no larger than the listed 24-ounce capacity.
- Buyers who prefer a washable fabric holder with small-item storage and a drawstring.
Skip If
- Your mounting point is outside the listed clamp range or is not a suitable round bar.
- You use an oversized tumbler, a bottle wider than the 3.94-inch base, or a drink heavier than the listed capacity.
- You ride a Road King, Spyder RT, or Burgman 400s, which the listing identifies as incompatible.
Before You Buy: Measure the exact bar section you plan to use, not the general handlebar size. Also check that the holder and drink will not block the throttle, brake lever, clutch lever, switches, steering movement, mirrors, gauges, or your view.
Design and Build Quality
600D Oxford Fabric Holder
The holder body uses 600D Oxford fabric. It will not rust like bare steel, and the listing describes it as washable. The soft body also gives you some flexibility with bottle shapes, although the 24-ounce capacity and 3.94-inch bottom diameter still set practical size limits.
Two-Screw Adjustable Clamp
The 90-degree alligator clamp uses two screws rather than the single-screw layout found on some basic holders. A cross-mounting hole gives you another way to orient the assembly. This design aims to reduce twisting and loosening, but secure performance still depends on correct placement and firm installation.
Drawstring, Drain, and Side Pockets
The reinforced drawstring closes around the drink to limit side-to-side movement. A drain opening helps water escape from the bottom, while two separate mesh pockets can hold small, lightweight items. Keep keys, cards, or cables secured because open mesh pockets may not retain loose objects during a hard bump.
Fit and Compatibility
The listed clamp range is 0.6 to 1.5 inches. That covers many motorcycle handlebars, ATV bars, scooter supports, bicycle bars, boat rails, walkers, and similar round mounting points. It does not guarantee fit on every vehicle because bar shape, nearby controls, fairings, trim, and available clearance vary.
The medium holder is listed for drinks up to 24 ounces, with a 3.94-inch bottom diameter. A tall, narrow bottle may fit differently from a short, wide tumbler even when both hold the same volume. Measure the widest lower section of your usual container and check that the lid can remain closed while the drawstring is tightened.
How to Install the KEMIMOTO Motorcycle Cup Holder
- Choose a safe mounting point: Select a round bar between 0.6 and 1.5 inches that does not move with a control or cable.
- Check clearance: Turn the handlebars fully left and right while the motorcycle is stationary. Confirm the empty holder cannot contact the tank, fairing, windshield, switches, levers, or cables.
- Position the clamp: Use the adjustable clamp and cross-mounting option to keep the holder as upright as your setup allows.
- Tighten both screws evenly: Alternate between the screws so the clamp seats evenly. Do not leave one side loose.
- Test with your drink: Insert a closed bottle or lidded cup, tighten the drawstring, and shake the bar lightly by hand before riding.
- Recheck after the first ride: Inspect the clamp and screws once the holder has been exposed to normal vibration.
Pro Tip: Mark the clamp position with a small removable piece of tape after setup. You can then spot rotation or movement quickly during your first few rides.
How It Performs in Real Use
For Daily Commuting
For short trips, the drawstring and fabric body make it easy to carry a standard water bottle without adding a bulky rigid cage. The side pockets can hold a small cable or card, but items should be light and secured. A lidded drink is the safer choice because vibration can push liquid through an open cup lid.
On Rough Roads and Trails
The two-screw clamp and cross-mounting design address the spinning that can affect simple single-point cup holders. The drawstring also reduces bottle movement. Even so, rough riding places more load on the clamp, so check the hardware before and after demanding trips and avoid exceeding the listed capacity.
On ATVs, Scooters, Bikes, and Boats
The broad bar-diameter range makes the holder useful beyond motorcycles. It can work on other compatible round bars when there is enough clearance and the holder remains upright. Marine use deserves extra care because the product has a drain, but the listing does not establish full waterproof or corrosion-proof performance for every component.
For Longer Rides
The holder keeps hydration within reach during stops, but you should not remove or replace a drink while the vehicle is moving. Use a closed container that can tolerate vibration, and plan to drink only when safely stopped. For larger bottles, choose a holder that is specifically rated for the bottle’s size and weight.
Compatibility and Safety
Install the holder only where it cannot affect steering, braking, throttle operation, clutch use, cables, switches, or visibility. Test the full steering range while stationary before every first use on a new mounting point. Stop using the holder if the clamp rotates, screws loosen, fabric tears, or the drink can contact a control.
Use a closed bottle or secure travel cup. Hot open drinks can spill when the vehicle moves, and even a properly installed holder cannot remove that risk. Do not reach for a drink while riding, and follow your motorcycle or vehicle manufacturer’s instructions for adding accessories near the controls.
Pros and Cons
Pros
- Two-screw 90-degree clamp offers more positioning control than a basic fixed mount.
- Fits many round bars from 0.6 to 1.5 inches.
- Drawstring helps reduce bottle movement on uneven roads.
- 600D Oxford fabric is washable and will not rust like an exposed metal cup ring.
- Bottom drain and two mesh pockets add practical everyday utility.
Cons
- The 24-ounce limit and 3.94-inch base will not suit many oversized tumblers.
- Fit depends on bar diameter, shape, control clearance, and the specific vehicle layout.
- The listing excludes Road King, Spyder RT, and Burgman 400s models.
Is It Worth the Price?
The KEMIMOTO holder offers strong value for the price if you need a clamp-on fabric holder with a drawstring, drain, and small-item pockets. Its main value comes from combining those features in one unit rather than providing only a rigid cup ring.
It is better for buyers who carry standard bottles and have a clearly compatible mounting point. It is not the best fit if you need support for a 30- or 32-ounce tumbler, a model-specific perch mount, or a holder designed for one particular motorcycle.
How It Compares to Alternatives
A larger KEMIMOTO 32-ounce clamp-on holder is worth comparing if your regular bottle exceeds this model’s 24-ounce limit. The LEXIN C3 uses a more rigid aluminum-style holder and may appeal to riders who prefer a hard structure instead of fabric.
This KEMIMOTO model makes the most sense when you want a softer washable holder, a tightening drawstring, two mesh pockets, and compatibility with several types of round bars. A model-specific perch mount may be better when your motorcycle lacks a suitable open handlebar section.
Warranty and Return Information
The reviewed Amazon product information lists a 30-day free return description, subject to Amazon’s current return terms and seller conditions. KEMIMOTO’s product page separately states a 90-day warranty against manufacturing defects for the original purchaser.
Because return and warranty coverage can differ by seller, country, and purchase channel, check the current terms shown on the checkout page before ordering. Keep your order record and inspect the clamp, screws, stitching, drawstring, and pockets when the holder arrives.
Frequently Asked Questions
What handlebar size does the KEMIMOTO cup holder fit?
The listing specifies round bars from 0.6 to 1.5 inches in diameter. Measure the exact mounting section and check nearby controls because diameter alone does not guarantee clearance.
Which motorcycles are listed as incompatible?
The Amazon listing says the holder is not compatible with Road King, Spyder RT, or Burgman 400s models. Other motorcycles may still have fit problems if there is no safe, open round-bar mounting point.
What bottle size can it hold?
The medium holder is listed for cups or bottles up to 24 ounces, with a 3.94-inch bottom diameter. Check the container’s width as well as its stated volume because wide tumblers may not seat correctly.
Will the drink stay secure on bumpy roads?
The reinforced top drawstring is designed to limit movement, and the clamp uses two screws to reduce rotation. You still need a correctly sized, lidded container and a firmly tightened mount.
Can it fit an electric bike, scooter, ATV, or walker?
It can fit other equipment with a suitable round 0.6- to 1.5-inch bar and enough clearance. Test stability and make sure the holder does not interfere with brakes, cables, folding joints, controls, or normal movement.
Can the mesh pockets hold a phone or keys?
The holder has two mesh pockets for small items, but the listing does not provide a phone-size rating for this exact model. Use them only for lightweight items that fit securely, and do not rely on open pockets for valuables during rough rides.
Is the holder waterproof and easy to clean?
The listing describes the 600D Oxford fabric as washable and includes a bottom drain, but it does not establish the full holder as waterproof. Wipe spills with mild soap and water, rinse carefully, and let the fabric dry fully before storage.
What warranty or return coverage is available?
Amazon’s product information lists a 30-day free return description, while KEMIMOTO’s product page states a 90-day warranty against manufacturing defects. Confirm the terms shown for your seller and location before purchasing.
The Bottom Line
The KEMIMOTO Motorcycle Cup Holder is a practical choice for riders who want a washable 24-ounce fabric holder with a two-screw clamp, drawstring, drain, and side pockets. Skip it if your bar or bottle falls outside the listed dimensions, or if you use one of the specifically excluded motorcycle models. Its main strength is versatile mounting, while its main limitation is fit that depends heavily on your exact vehicle and drink container.
Ready to Buy?
Check the latest price, selected size, seller terms, and product details before you decide.
