Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Windshield haze, fingerprints, road film, and towel marks can make freshly cleaned glass look worse than before. Invisible Glass 91164 Premium Aerosol Glass Cleaner Spray is a 19 oz, ammonia-free cleaner made for automotive and household glass, including factory-tinted and aftermarket-tinted windows. Its foaming aerosol clings to vertical surfaces and uses a formula with no added soaps, scents, or dyes. The main limitation is simple: it is a glass cleaner, not a safe substitute for dashboard, touchscreen, leather, fabric, or specialty coating products.
Quick Verdict
Rating: 8.4/10, Recommended with caveats
Best For: Drivers and homeowners who want an ammonia-free aerosol cleaner for windshields, tinted windows, mirrors, and other approved glass surfaces.
Bottom Line: Invisible Glass 91164 is a strong choice when you want clinging foam and a low-residue finish for glass. It is less useful if you need one cleaner for every interior surface or a product made for hard-water deposits, plastic lenses, or specialty coatings.
| Specification | Detail |
|---|---|
| Brand | Invisible Glass |
| Model | 91164 |
| Manufacturer | Stoner Inc. |
| Product type | Foaming aerosol glass cleaner |
| Size | 19 oz can |
| Formula profile | Ammonia-free, with no added soaps, scents, or dyes |
| Tint compatibility | Designed for factory-tinted and aftermarket-tinted glass when used as directed |
| Approved glass uses | Windshields, vehicle windows, mirrors, shower doors, glass cooktops, and tabletops when the surface maker allows glass cleaner |
| Cleaning targets | Oil, dirt, grease, fingerprints, smudges, smoke haze, sap, bugs, and road grime on glass |
| Residue claim | Manufacturer states the formula was independently tested as 100% residue-free |
| Package options | Single-can and multi-pack options may be available, depending on the seller |
| Country of manufacture | USA |
| Storage note | Keep the aerosol can in a cool place out of direct sun, away from children, and follow the label directions. |
Key Takeaways
- Invisible Glass 91164 is a 19 oz foaming aerosol cleaner made for automotive and household glass.
- The ammonia-free formula is designed for both factory-tinted and aftermarket-tinted windows.
- No added soaps, scents, or dyes helps reduce the film that can cause haze after cleaning.
- The foam clings to vertical glass, which gives you more control than a thin liquid spray.
- Clean, detergent-free towels and complete drying are still essential for a streak-free finish.
What Is the Invisible Glass 91164?
Invisible Glass 91164 is a glass-focused aerosol cleaner from Stoner Inc. The 19 oz can sprays a foam that stays on windshields, side windows, mirrors, and other vertical glass long enough for you to lift oily film and grime before the product runs down the surface.
The manufacturer describes the formula as ammonia-free and free of added soaps, scents, and dyes. Those details matter because leftover additives and towel residue are common causes of visible haze. The product is also designed for factory-tinted and aftermarket-tinted automotive glass when you follow the label directions.
This cleaner is made for drivers, detailers, and homeowners who want one product for approved glass surfaces. It does not replace a dashboard cleaner, screen-safe spray, plastic polish, hard-water remover, or coating-specific maintenance product.
Foaming Action and Grime Removal
The aerosol foam is the main practical difference between this product and a thin trigger spray. It clings to windshields, mirrors, and side windows, giving you time to wipe before the cleaner reaches trim, vents, or the bottom edge of the glass.
The formula is intended to remove oil, grease, fingerprints, smudges, smoke haze, sap, bugs, dirt, and road grime from glass. It works best on routine film and fresh contamination. Thick mineral scale, etched water spots, or oxidized plastic may need a different product and a separate process.
You still need to control how much you spray. A light, even layer is easier to wipe dry than a heavy coating, especially on the inside of a windshield where access is limited.
Residue Control and Streak Prevention
Invisible Glass avoids added soaps, scents, and dyes that can remain on the surface after the liquid evaporates. The manufacturer also states that independent laboratory testing found the formula to be 100% residue-free.
That does not make your towel technique irrelevant. Detergent, fabric softener, silicone dressings, and old grime trapped in a cloth can move residue back onto the glass. A second clean, dry towel is often the step that removes the final haze.
For easier inspection, wipe one side of the glass with vertical strokes and the other side with horizontal strokes. If you see a streak later, the direction helps you identify whether it is on the inside or outside.
Tint Compatibility and Surface Safety
The ammonia-free formula is suitable for factory-tinted and aftermarket-tinted windows when used as directed. Use light pressure around tint edges and do not leave the surface wet longer than needed.
The cleaner is intended for glass, including windshields, mirrors, shower doors, glass cooktops, and tabletops when the surface maker permits glass cleaner. Check the care instructions before using it on coated, treated, heated, printed, or specialty glass.
Because this is an aerosol, use reasonable ventilation and avoid spraying toward your face. Store the can in a cool place away from direct sun and children. Wipe accidental overspray from trim, rubber seals, painted frames, or dashboards instead of letting it sit.
Before You Buy: This is not an all-surface interior cleaner. Do not use it as a default choice for dashboards, instrument screens, touchscreens, leather, fabric, raw plastic, or specialty coatings.
Who Should Buy It?
Best For
- Drivers who need an ammonia-free cleaner for factory or aftermarket tinted windows.
- Home users who regularly clean mirrors, shower doors, glass tabletops, or approved glass cooktops.
- Detailing-focused buyers who prefer clinging aerosol foam over a runny trigger spray.
Skip If
- You need one cleaner for glass, dashboards, screens, upholstery, and leather.
- You prefer a refillable trigger bottle or want to avoid aerosol products indoors.
- Your glass has a coating that requires a manufacturer-approved maintenance product.
How It Performs in Real Use
For Interior Windshields
Interior windshield film often comes from fingerprints, smoke haze, and vapors released by cabin materials. The foam gives you controlled coverage, but the curved glass and dashboard angle still make drying difficult. Work on half the windshield at a time and finish with a second dry towel.
For Exterior Windshields and Windows
On exterior glass, the cleaner can lift fresh road grime, bugs, sap, and oily residue. Remove loose grit first so you do not drag abrasive particles across the surface. Stubborn bonded deposits may need a dedicated glass polish or contaminant remover.
For Tinted Side and Rear Windows
The ammonia-free formula is a good match for tinted glass. Spray lightly, avoid flooding film edges, and use a soft, clean microfiber towel. Do not scrape aftermarket tint with blades or abrasive pads.
For Mirrors, Shower Doors, and Home Glass
The foam works well on bathroom mirrors, glass doors, and tabletops because it clings instead of running immediately. It can remove fingerprints, haze, and routine film, but heavy hard-water scale may require a product designed for mineral deposits.
How to Use Invisible Glass 91164 for Best Results
Use clean, lint-free towels or microfiber cloths that are free of detergent and fabric-softener residue. The manufacturer also notes that some users prefer crumpled newspaper, but a clean microfiber towel is easier to control around tint and trim.
- Remove loose debris: Wipe away dust, grit, or sand before applying cleaner.
- Spray a light layer: Apply the foam directly to the glass. Near electronics, vents, or trim seams, spray the towel instead.
- Lift the grime: Gently wipe the wet glass with a clean cloth until fingerprints, road film, and smudges are removed.
- Dry completely: Buff with a new, dry towel until no moisture or haze remains.
- Inspect from another angle: Change your viewing angle or move the vehicle into different light to catch remaining streaks.
Pro Tip: Wipe the inside of the glass vertically and the outside horizontally. The direction of any remaining streak will show you which side needs another pass.
Common Mistakes to Avoid
Do not use one dirty towel for the entire vehicle or room. Once the cloth loads up with grease and dust, it can smear the same contamination across the next surface.
Do not saturate the lower edge of tinted windows or spray heavily around dashboard seams, speakers, vents, switches, and electronics. Apply the product to your towel when you need tighter control.
Do not clean hot glass in direct sun if you can avoid it. Fast evaporation can reduce your working time and make towel marks harder to remove.
Do not expect a routine glass cleaner to restore cloudy plastic headlights, remove deep hard-water etching, or maintain a specialty ceramic or rain-repellent coating unless the coating maker approves it.
What the Formula Can and Cannot Do
The strongest use case is routine cleaning. The foam can loosen fingerprints, smoke haze, oily film, road dirt, and fresh contamination while the low-additive formula helps reduce leftover haze.
It cannot correct scratched glass, repair damaged tint, polish oxidation from plastic lenses, or dissolve every mineral deposit. Clear results also depend on using a clean towel and drying the surface fully.
Pros and Cons
Pros
- Ammonia-free formula is designed for factory and aftermarket tinted glass.
- Foaming aerosol clings to vertical glass and gives you more wiping time.
- No added soaps, scents, or dyes helps limit film and haze.
- Useful for both automotive glass and several common household glass surfaces.
- Handles fingerprints, smoke haze, grease, smudges, bugs, and road grime.
Cons
- Not suitable as a general cleaner for dashboards, screens, leather, fabric, or raw plastic.
- Aerosol format may be inconvenient in tight indoor spaces or for buyers who prefer refillable bottles.
- Streak-free results still require clean towels, light application, and complete drying.
Is It Worth the Price?
Invisible Glass 91164 offers strong value for the price if you clean vehicle glass often or want one glass-focused product for both your car and home. The 19 oz can provides enough cleaner for repeated use, and the clinging foam can reduce waste compared with a thin spray that quickly runs off vertical surfaces.
It is worth considering if tint compatibility, low residue, and controlled aerosol application matter to you. The value is weaker if you only clean a small mirror occasionally or need one product for many non-glass surfaces.
The main tradeoff is specialization. You may still need separate products for hard-water deposits, coated glass, touchscreens, plastic lenses, dashboard materials, and upholstery.
How It Compares to Alternatives
Sprayway Glass Cleaner is another aerosol option worth comparing if you want foaming application for household and automotive glass. Windex Ammonia-Free may suit you better if you prefer a trigger bottle instead of an aerosol can.
Invisible Glass 91164 makes the most sense if your priorities are tint-safe use, clinging foam, and a formula without added soaps, scents, or dyes. A coating-specific cleaner is a better choice when you need to maintain ceramic-treated or rain-repellent glass.
Frequently Asked Questions
Is Invisible Glass 91164 safe for tinted windows?
Yes. The manufacturer says it is safe for factory-tinted and aftermarket-tinted glass when used as directed. Spray lightly, avoid soaking film edges, and dry the glass completely.
Can I use Invisible Glass 91164 on my dashboard or touchscreen?
Do not use it as a default dashboard or screen cleaner. Choose a product approved for the specific plastic, vinyl, coated display, leather, or rubber surface you need to clean.
What glass surfaces can it clean?
It is intended for automotive glass, mirrors, shower doors, glass cooktops, and tabletops. Check the surface maker’s instructions before using it on coated, printed, heated, or specialty glass.
Is Invisible Glass 91164 ammonia-free?
Yes. The formula contains no ammonia and is designed to avoid the strong ammonia odor and tint concerns associated with some traditional glass cleaners.
Why do I still see streaks after cleaning?
Common causes include using too much cleaner, wiping with a dirty towel, fabric-softener residue, or leaving the glass slightly damp. Use a light application and finish with a second clean, dry cloth.
Will it remove hard-water spots from shower glass?
It can remove routine film and fresh residue, but heavy mineral buildup may need a dedicated hard-water cleaner. Test any stronger product in a small area and follow the glass maker’s care directions.
Can I use it on headlights?
Use caution because most modern headlight lenses are plastic rather than glass. For cloudy, yellowed, or oxidized lenses, use a headlight restoration product approved for plastic.
How should I store the aerosol can?
Keep it in a cool location out of direct sun and away from children. Do not leave the pressurized can in a hot vehicle, and follow all storage and disposal instructions printed on the label.
The Bottom Line
Invisible Glass 91164 is recommended for drivers and homeowners who want a tint-safe, ammonia-free aerosol foam for routine glass cleaning. Its main strengths are controlled clinging foam and a formula without added soaps, scents, or dyes. Skip it if you need an all-purpose interior cleaner, a plastic restoration product, or a specialty treatment for coated glass or heavy mineral deposits.
